RPTR-OBA/734
Installation Manual
REV: B (04/25/2022)
30
5.
Re-install the OEM bolt & parking brake cable bracket loosely.
a.
Alternate: Place RAPTOR-311 lower mounting point over the clip-on nut and secure in
place using H15, H16, H17 in the stacking order shown in the beginning of this section.
6.
For the bracket -311 upper mounting point, insert H4 & H11 (stacked) into the square hole and
orient the threads to face outside of the frame rail through the circular hole. Reference the
following figure.
Figure 34- RAPTOR-311 Upper Mounting Point Hardware Setup
7.
Place -311 upper mounting hole onto the hardware & install H8, H10, H13 in the stacking order
(noted in the beginning of this section) onto the fastener as shown in the below figure.
Figure 35- RAPTOR-311 Installed
8.
Torque parking brake bracket bolt to OEM specifications
a.
Alternate: Torque lower fastener to 75-88 in-lbs.
9.
Torque upper fastener to 75-88 in-lbs.
