Kleenmaid LTKA6, Инструкция по установке

Страница: 19 / 24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19
802725
Gas Dryer
NOTE: The wiring diagram is located inside the
control hood.
This dryer is designed to be operated on a two-wire,
plus earth, 240 Volt, 50 Hertz, single-phase circuit,
fused at 10 Amperes.
Insert the dryer’s lead-in cord plug into an earthing
three-slot wall receptacle on a separate circuit. DO
NOT OPERATE OTHER APPLIANCES ON THE
SAME CIRCUIT WHEN THE DRYER IS
OPERATING.
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the
manufacturer or its service agent and is to be replaced
by a qualified service person.
Figure 19
To reduce the risk of fire, electric shock or
personal injury, all wiring and earthing to
the dryer MUST conform with the latest
edition of the Australian Electrical
Standards, AS3000, SAA wiring rules, and
such local regulations that might apply.
W478
WARNING
If this appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set or electrical
portable outlet device must be positioned
so that it is not subject to splashing or
ingress of moisture.
W563
CAUTION
DRY2155N
1 Lead-In Cord
2 Earth Screw
3 Lead-In Cord Plug
4 Earth
10A
250 V
DRY2155N
1
2
4
3