Kleenmaid LTKA6, Инструкция по установке

Страница: 16 / 24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802725
16
Step 9: Connect the Washer and Dryer to
Electrical Power
Washer
(240 Volt, 50 Hertz with 3 Prong Earthing Plug)
NOTE: The wiring diagram is located behind the
control panel, inside the control cabinet.
Figure 16
The washer is designed to be operated on a separate
branch, polarized, three-wire, effectively earthed,
240 Volt, 50 Hertz, AC (alternating current) circuit
protected by a
10 Ampere fuse
, equivalent fusetron or
circuit breaker.
The three-prong earthing plug on the power cord
should be plugged directly into a polarized three-slot
effectively earthed receptacle rated 240 Volts AC
(alternating current) 10 Amps. Refer to
Figure 17
to
determine correct polarity of the wall receptacle.
D009I
To reduce the risk of fire, electric shock,
serious injury or death, all wiring and
earthing MUST abide with local electrical
codes. It is the customer’s responsibility to
have the wiring and fuses installed by a
qualified electrician to make sure adequate
electrical power is available to the washer.
W517
WARNING
DO NOT OVERLOAD
CIRCUITS
DO NOT USE AN
ADAPTER
DO NOT USE AN
EXTENSION CORD
If this appliance is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set or electrical
portable outlet device must be positioned
so that it is not subject to splashing or
ingress of moisture.
W563
CAUTION
To reduce the risk of an electric shock or
fire, DO NOT use an extension cord or an
adapter to connect the washer to the
electric power source.
W082
WARNING