background image

Instruction 

manual 

HK12/2EL        page 

19 

_____________________________________________________________________________ 

 
With those dies mentioned in Table 3a only Klauke cable lugs and connectors „Standard 
type“ are supposed to be crimped. Crimping of commercial cable lugs and connectors of other 
suppliers will not result in a perfect crimp. 
 
The same is applicable for conducting material table 3j. No guarantee can be given for 
crimping C-clamps of other suppliers. 
 
Despite the same code numbers the compression width for copper and aluminium cable lugs 
and connectors is different. Besides the marking of the dies the plating is different too. 
 

Attention 
Even if the code number is identical only those dies should be used which are 
suitable for the material. 

 

5.4. Service and maintenance instruction

 

 
The electro-hydraulic unit must be cleaned and dried after each use. The pump is basically 
maintenance free, only the oil level must be checked regularly and the pump has to be 
inspected for possible damages and wear. 

 

The HK12/2EL220 is equipped with an oil level 
control glass which enables the operator the check the 
oil without opening the pump. 
 
The oil level should be 10 mm below the top of the 
control glass. If the oil level is too low please fill up 
the oil accordingly. 
 
To check the oil level of the HK12/2EL/380 use the 
control pin of the oil filler (Pos.-No. 4). If the oil level 
proves to be unsatisfactory (below the min. mark) 
additional oil has to be added. To do that open the oil 
filler plug (Pos.-No. 4) and fill in the oil. After 
servicing the oil filler plug must be screwed on again. 
 

The hydraulic hose (Pos.-No. 9) and the armature 

must be checked for damage and leakage. 

 

5.5. Oil changing cycles

 

 
It is advisable to have the unit serviced by a specialist in regular intervals to safeguard a 
technically proper state before use. 
 
Table 2 - Service schedule 

 

  What   

 

 

When   

 

who 

 __________________________________________________________________________________________ 

 

Cleaning 

  after 

each 

use 

 Service 

personnel 

 

Check 

oil 

level  weekly 

  Service 

personnel 

  Check high pressure hose 

weekly  

 

Specialist 

 

Proper 

state 

  quarterly 

 Electric 

specialist 

  Change hydraulic oil   

annually 

 

manufacturer/specialist 

Picture 2 HK12/2EL/220 

Содержание HK 12/2 EL


























Отзывы: