Instruction
manual
HK12/2EL page
20
_____________________________________________________________________________
The hydraulic oil has to be completely changed annually or after 10.000 compressions
if the tool is used frequently. We recommend to have the service done in specialised
companies where the safe disposal of the oil is guaranteed.
Attention
Please use only clean, proper hydraulic oil.
(AVIA HVI 15 and other hydraulic oils of similar quality)
Attention
Hydraulic oils can cause cutaneous eruption (eczema) or other health hazards.
Avoid longer skin contact. Wash your hands carefully after each
contact.
Attention
Spilled hydraulic oil has to be absorbed immediately.
5.6. Reference as to which spare parts can be exchanged by the customer
Within the determined use of the tool only the dies (Pos.-No. 10) and the oil are permitted to
be changed by the customer.
Attention
Do not damage the seals of the tool.
Do not attempt to repair the tool yourself, and do not remove any parts such as screws and
other components.
5.7. Storage and transport of the crimping tool
In order to protect the tool against damages it has to be cleaned carefully before being stored
away.
The hydraulic pump is supplied with a special trolley (Pos.-No. 11) for easy and safe
transportation. The hydraulic hose (Pos.-No. 8) is the most vulnerable part of the unit and has
to be handled with care. The minimum bending radius should not be lower than 70 mm.
