Klauke TEXTRON HK 12/2 EL, Инструкция по эксплуатации

Страница: 14 / 25

Instruction manual HK12/2EL page 14
_____________________________________________________________________________
4. Description of the hydraulic crimping unit
4.1. Description of the components
The electro hydraulic crimping unit type HK 12/2 EL consists of the following components:
picture 1
Crimping head Dies
Pos.-Nr. 9 Pos.-Nr. 10
Power supply
Power switch plug
Pos.-Nr. 1 Pos.-Nr. 6
Hydraulic hose
Power control Pos.-Nr. 8
lamp
Pos.-Nr. 3
Socket
Oil filler and dip rod
for Footswitch Pos.-Nr. 4
Pos.-Nr. 2
Trolley
Oil release screw
Pos.-Nr. 11 Pos.-Nr. 5
This picture does not correspond in all details with the version delivered.
Table 1
Pos.-No. Description Function Reference
1 Power switch Switch for the power supply P 3, 5
2 Socket to connect the safety foot switch with the
pump P 3, 4
3 Power control lamp Lamp that indicates that the pump is ready for
service
P 3, 4
4 Oil filler and oil dip
rod Cap screw to oil reservoir with an oil level
measuring device P 3, 9
5 Oil release screw Screw necessary to change the hydraulic oil P 3
6 Power supply plug Plug for rotary/alternating current P 3, 5
7 Safety foot switch Three step safety foot switch to operate the
unit P 3, 5
8 Hydraulic hose High pressure steel armed hydraulic hose P 3, 5, 9,
10, 11
9 Crimping head C-shaped 12 to crimping head P 3, 5
10 Dies parts to crimp cable lugs and conductors with P 3, 4, 6, 8
11 Trolley for a safe transport of this crimping unit P 3, 11