Kitett MINIKIT DUO, Инструкция по эксплуатации

Страница: 15 / 78

15
Recycling
KITETT® breast pumps must be disposed of in accordance with local disposal guidelines for electrical
appliances. Use your local waste disposal system for electrical and electronic equipment (including batteries).
You thus contribute to the preservation of the environment and the protection of human health.
Device placed on the market after 13 August 2005.
10. Technical specifications
Device class (in accordance with Directive 93/42/EEC
amended by Directive 2007/47/EC)
IIa
Class of electrical safety device Class II
Type of applied parts BF
Degree of protection IP22
Expected life of accessories 1 year
Operating life span of the unit 300 hours
Useful life span of the unit 3 years
Capacity of the collection container 100ml
Weight of the device 200g without battery
Dimensions 120mm x 90mm x 60mm
Voltage
Input: 100-240V (AC) – 50/60Hz – 0.5A Max. /
Output: 6V (DC) – 1.0A
Length of the cable 1.8m
Absorbed power 5.2W
Suction Values
Stimulation phase: -80 to -140 mbar
Expression phase: -155 to -280 mbar
Maximum suction: <-330 mbar
Rate 40 to 120 cycles/min.
Sound level < 56 dB(A)
Power supply Alternating current 100-240V - 50/60 Hz
Battery 4 x 1,5V - AA, LR06
Room temperature (T)
for operation
+5°C < T < +40°C
Room temperature (T)
for transport and storage
-25°C < T < +70°C
Relative humidity (H)
for transport, storage and operation
15% < H < 90%
Atmospheric pressure (P)
for transport, storage and operation
700 hPa < P < 1060 hPa
Essential performance features:
•
Provide adequate suction so that mothers can express their milk.
•
Control the rate of suction to best meet the baby’s sucking rhythm.
•
Equipment with moderate compression and low flow. Intermittent suction.
Part applied to the body: breast shield
NOTE: The CE declaration of conformity and a technical description can be supplied on demand.
Identification:
Each breast pump has a batch identification that indicates the year of manufacture.
11. Electromagnetic compatibility (EMC)
Electromedical devices require special precautions with regard to EMC and must be installed and set to operate in
accordance with the EMC information provided in this manual.
WARNING: Avoid using this unit near or stacked onto other equipment as this may cause a malfunction. If this is
necessary, this appliance and the other appliances should be monitored to check they are operating normally.