Kinoton FP 10 A, Руководство по эксплуатации

Страница: 67 / 105

FP 25/30/50 D / FP 10/20/3050 A
Issue: 04/2011 57
6 .3 Maintenance
Daily
Component What is to do?
intermittent movement Check oil level => oil level must be between the red and the
green ring, if necessary refill oil, see chapter 6.3.2.
Every 3 months
Component What is to do?
lens holder Lubricate the lens holder guidance with Cardan oil,
type 8657
fibre gear /
shutter shaft worm
Lubricate with Kinoton EL 4854 grease.
chains Lubricate with Esso universal oil.
aperture changer
(if installed)
Clean the part of the shaft above the film path with a cloth,
and the threaded part of the shaft (inside the back cover) with
a brush. After cleaning lubricate the threaded part of the shaft
with Klübertex BEM 43-132 or Esso universal oil.
Do not lubricate the brass tube/non threaded parts of shaft!
Every 6 months
Component What is to do?
Reverse-scan sound
device
Check O-rings on sound pressure roller.
Check all rollers, whether they run easily.
Annually
Component What is to do?
sound reproducer Lubricate the pressure roller ball bearings with a drop of
Cardan oil, type 8657.
Do not use any other lubricant!
Lubricate the sound drum shaft with 1 drop of Esso
universal oil.
X
NOTE
Z
Cardan oil is very pasty therefore the ball bearings will be retarded for a proper film
run. By getting move the guide roller with one finger, the roller has to stop at last
after a half of turn. Otherwise you have to clean the bearing and then fill it with
Cardan oil.
Z You must not use any oil or grease!
water cooling (if existing) Empty and clean and refill coolant. Check whether pump
and refrigeration system are sealed and working properly.
Maintenance and Repair