FP 50 D
Operation
Issue: 04/2011
47
5
Operation and Troubleshooting
5 .1
Switching On and Starting the Projector
• Switch on the external power supply for the performance room.
• Switch on the main switch
(position “I”).
$
The switch illuminates red.
• Thread the film (see chapter 5.3).
• Push the button
.
$
The projector is running, ventilation is on, xenon lamp is on.
• If necessary push the button
, to open the dowser after the start leader has run
through.
5 .2
Stopping and Switching Off Projector
• To stop the projector manually push
and close the dowser by pushing
.
$
The dowser closes, the xenon lamp turns off, the projector stops and the ventilation is
on (if temperature is more than 60° C).
• Switch off the main switch
(position “0”).
$
The key lamp gets off.
• Switch off the external power supply for the performance room.
X
NOTE
Z
If you have an emergency stop, push the main switch
(position “0”), to cut the
power.
Z
If the film is run through the projector stops due to the film break sensor.
Содержание FP 10 A
