Kingspan AeroMax Plus KHP0038, Руководство по установке и обслуживанию

Страница: 48 / 72

48
Option 34 - Select On/Off or Chrono-proportional
This allows the thermostat to be set to
run in On/Off mode or for a chrono-
proportional cycle rate to be selected.
Press + until Option 34 is displayed, use
7BOEȣUPTFMFDUSFRVJSFETFUUJOH
0 On/Off
3 3 cycles per hour
6 6 cycles per hour (factory setting)
9 9 cycles per hour
12 12 cycles per hour
Option 35 - Set integration time (Option 34 set to 3, 6, 9 or
12) (seek advice prior to adjusting)
This adjusts the integration time of
the PI algorithm to increase control
accuracy. It is only active if option 34 has
been set to Chrono 3, 6, 9 or 12.
It should only be adjusted after seeking
advice from the manufacturer. Press +
VOUJM0QUJPOJTEJTQMBZFEVTF7BOEȣ
to select required setting.
2.5 *OUFHSBUJPOUJNFTFUUP GBDUPSZTFUUJOH
5
*OUFHSBUJPOUJNFTFUUP
10
*OUFHSBUJPOUJNFTFUUP
Option 38 - Relay state on low battery detect
(battery products only)
This establishes the position that the
relay is driven to when the unit shuts
down due to low battery state.
Press + until Option 38 is displayed,
VTF7BOEȣUPTFMFDUSFRVJSFETFUUJOH
Setting 0
3FMBZQBSLFEXJUIPVUQVU0'' GBDUPSZTFUUJOH
Setting 1 Relay parked with output ON
Option 36 - Set temperature override rule
This establishes the degree of tempera-
ture override available to the user. Press
+ until Option 36 is displayed, use V
BOEȣUPTFMFDUSFRVJSFETFUUJOH
Setting 0 No limit (factory setting)
Setting 1
-JNJUFEUPœ¡$
Setting 2 No override allowed
Option 37 - Set time duration of override rule
(Option 36 set to 1 or 2)
This establishes the duration of a tem-
perature override available to the user.
Press + until Option 37 is displayed, use
7BOEȣUPTFMFDUSFRVJSFETFUUJOH
Setting 0 Next event (factory setting)
Setting 1 1 hour
Setting 2 2 hours
Setting 3 3 hours
Setting 4 4 hours
Option 40 - Number of Events per Day
This sets the thermostat to operate
with either 2, 4 or 6 switching events
per day or to run it in stat mode.
Press + until option 40 is displayed, use
ȣPS7UPTFMFDUSFRVJSFETFUUJOH
1 Stat mode
2 Two switching events per day
4 'PVSTXJUDIJOHFWFOUTQFSEBZ 'BDUPSZTFUUJOH
6 Six switching events per day
Setting 4 4 hours
Option 41 - Operating Mode (5/2 day or 24 hour)
This sets the thermostat to operate
using either 5/2 day or 24 hour mode.
Press + until option 41 is displayed,
VTFȣPS7UPTFMFDUSFRVJSFETFUUJOH
5-2 EBZ 'BDUPSZTFUUJOH
24 24 hour
Option 70 - Keyboard disable rules
This establishes the degree of
functionality of the
keyboard available to the user.
It is only active if DIL
switch 1 is set to “Disabled”.
Press + until Option 70 is
EJTQMBZFEVTF7BOEȣUP
select required setting.
Setting 0 Normal lock: Programming functions locked
(factory setting)
Setting 1 'VMMMPDL"MMLFZTBSFEJTBCMFE
ff
Programable room stat