Kingspan AeroMax Plus KHP0038, Руководство по установке и обслуживанию

Страница: 34 / 72

34
To enter advanced programming press PROG, + and DAY/HOL together and hold for 5 seconds.
Option 1 - (3 or 2 On/Off ’s per day)
Use + or - to change between 3 and 2 on/off ’s each day.
Advanced Programming Options
Option 2 - (Disable or enable auto time change)
Press NEXT , then use + or - change between auto time change
enabled and auto time change disabled.
3 2
3 on/off ’s each day (Factory setting) 2 on/off ’s each day
Auto time change enabled (Factory setting) Auto time change disabled
Option 2 - (Disable or enable auto time change)
Press NEXT, then use + or - change between auto time change enabled and auto time change disabled
Option 8 - (Advanced Copy Functions)
Press NEXT, then + or - to change between the following
copy
options:
(0) Standard copy in 7 day and 5+2 day.
(1) Enhanced copy in 7 day, standard copy in 5+2 day
(2) Enhanced copy in 7 day, AB copy in 5+2 day.
'PSBOFYQMBOBUJPOPGUIFDPQZGFBUVSFTBOEIPXUPVTF
them please see copy functions explained section below.
Press PROG to return to RUN .
There are 3 possible copy functions available. These are;
Standard Copy, Enhanced Copy, and AB copy. Copy
functions are enabled/disabled in the Advanced
Programming Options (above).
Standard Copy : Pressing copy will copy the previous days
events into the displayed day. The unit will then display
the 1st event for the new day. This copy function is present
only if the unit is set to run in 5+2 or 7 day mode.
Enhanced Copy: The enhanced copy function is available
in 7 day mode only. This allows any day to be copied to any
other day, or days. To use the enhanced copy function go
into the event programming using the PROG button, then:
1. Use the DAY button to fi nd the day to be copied from.
2. Press the COPY button to select the day to be copied
from.
When selected, the day should begin to fl ash.
3. Use the DAY button to fi nd the day to be copied to.
4. Press COPY button to copy the selected day.
5. Repeat steps 3 and 4 to select and copy other days.
6. To stop copying, use the DAY button to go back to the
fl ashing day and press the COPY button. The previously
fl ashing day will stop fl ashing to indicate it has been
deselected.
Copy Functions Explained
Please Note:
When a day has been copied to, it will remain visible and not fl ashing when the DAY button is used to select other days.
7 day hot water programmer