Kingspan AeroMax Plus KHP0038, Руководство по установке и обслуживанию

Страница: 47 / 72

47
TP5000 Si incorporates a number of advanced features
which can be set by the user. These are accessed via a
User Advanced Programming Mode, please refer to User
Advanced Programming in the user instructions for details
(see page 66).
Installer advanced programming options
Entering Installer Advanced Programming Mode
TP5000 Si incorporates an additional number of advanced
features which can be set by the installer to improve the
operating efficiency of the system and where required, to
change the user functionality of the product. These are
accessed via an Installer Advanced Programming
Mode.
Installer advanced programming options
These settings are optional and need only be made if there is
a demand for the enhanced functions.
To access the Installer Advanced Programming
Mode follow the steps below:
a) Press and hold V and PROG for 3
seconds to enter User Advanced
Programming, the display will change
to figure opposite.
C1SFTTBOEIPME7ȣBOE130(GPS
5 seconds to enter Installer Advanced
Programming, the display will change
to figure opposite.
c) Use + and - keys to scroll backwards and forwards
CFUXFFOPQUJPOTUIFO7BOEȣLFZTUPDIBOHFUIFPQUJPO
settings. The fl ashing digit on the right hand of the display
indicates the number of the selected option. The large
characters display the option value selected.
d) To return to RUN, press
b i
Option 30 - Set upper limit of temperature range
This allows the upper limit of the
thermostat setting range to be elec-
tronically limited. Press + until Option
30 is displayed, use V and
ȣ
to select
required setting.
Setting ¡$ 'BDUPSZTFUUJOHJT¡$
Option 31 - Set lower limit of temperature range
This allows the lower limit of the
thermostat setting range to be elec-
tronically limited. Press + until Option
JTEJTQMBZFEVTF7BOEȣUPTFMFDU
required setting.
Setting ¡$ 'BDUPSZTFUUJOHJT¡$
Option 32 - Enable Off at lower limit
5IJTFOBCMFTBO0''GVODUJPOUPCF
selected if a set point below the lower
limit is selected. Press + until Option
JTEJTQMBZFEVTF7BOEȣUPTFMFDU
required setting.
Setting 0 Disabled
Setting 1 Enabled (factory setting)
Option 33 - Enable On at upper limit
This enables an ON function to be
selected if a set point above the upper
limit is selected. Press + until
0QUJPOJTEJTQMBZFEVTF7BOEȣUP
select required setting.
Setting 0 Disabled (factory setting)
Setting 1 Enabled
Programable room stat