Kingfisher NMBC1000 Скачать руководство пользователя

Страница: 7 / 50

NMBC1000

Getting

started...

Safety information

Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

Keep handles and grasping surfaces dry, clean

and free from oil and grease.

Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

Service

Have your power tools serviced by a qualified

repair person using only identical replacement

parts.

This will ensure that safety of the power tool is

maintained.

Electrically powered grass trimmer safety

warnings

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Training

1. Read the instructions carefully. Be familiar with the

controls and the correct use of the machine.

2. Never allow children or people unfamiliar with these

instructions to use the machine. Local regulations can

restrict the age of the operator.

3. Keep in mind that the operator or user is responsible

for accidents or hazards occurring to other people or

their property.

Preparation

1. The machine should be supplied via a residual current

device (RCD) with a tripping current of not more than

30 mA.

No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 7

10/20/21 12:02 PM

Содержание NMBC1000



















































Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды

Kingfisher NMBC1000, Оригинальное руководство пользователя

Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды