EN
31
EN
In
more
detail...
NMBC1000
Operation
Cutting
WARNING!
Kickback (blade thrust): When working with the blade
there is always a risk of kickback (blade thrust) if the cutting device
comes into contact with a hard object! Kickback (blade thrust) will
cause the sudden stalling of the cutting device, which in turn results in
the cutting device being forced in the opposite direction to the rotation
of the blade! Ensure that you retain a firm grip with both hands at any
sign of such kickback (blade thrust), pay attention and retain a firm
stance to avoid injuries!
Kickback (blade thrust) is more likely to occur in areas where it is
difficult to see the material to be cut!
Danger zone between 12 and 2 o’clock
2. Hold the product firmly so that it sits
with a gap between the product and
your right side.
3. Stand upright, do not lean forward
and pay attention to posture. Keep
both feet apart to help retain your
balance.
4. Never hold the cutting head higher
than your hip (Fig. 19), the higher
you hold the cutting head will
increase the risk of objects being
thrown.
max.
Fig. 19
5. Carefully plunge the blade from above when cutting long undergrowth.
Trimming
1. Attach the trimmer head (16) to cut to cut smaller types of weed, lawn grass
or similar soft vegetation. Make sure that the trimmer guard (13) has been
attached properly.
2. Hold the product firmly with a gap between the product and your right side.
3. Stand upright, do not lean forward and pay attention to posture. Keep both
feet apart to help retain your balance.
No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 31
10/20/21 12:02 PM
