Kingfisher NMBC1000 Скачать руководство пользователя

Страница: 8 / 50

NMBC1000

Safety information

Getting

started...

Safety warnings

2. Before use check the supply and extension cord

for signs of damage or aging. If the cord becomes

damaged during use, disconnect the cord from the

supply immediately. DO NOT TOUCH THE CORD

BEFORE DISCONNECTING THE SUPPLY. Do not

use the machine if the cord is damaged or worn.

3. Before use, always visually inspect the machine for

damaged, missing or misplaced guards or shields.

4. Never operate the machine while people, especially

children, or pets are nearby.

Operation

1. Keep supply and extension cords away from cutting

means.

2. Wear eye protection and stout shoes at all times while

operating the machine.

3. Avoid using the machine in bad weather conditions

especially when there is a risk of lightning.

4. Use the machine only in daylight or good artificial light.

5. Never operate the machine with damaged guards or

shields or without guards or shields in place.

6. Switch on the motor only when the hands and feet are

away from the cutting means.

7. Always disconnect the machine from the power supply

(i.e. remove the plug from the mains, remove the

disabling device or removable battery)

1) whenever the machine is left unattended;

2) before clearing a blockage;

3) before checking, cleaning or working on the machine;

4) after striking a foreign object;

5) whenever the machine starts vibrating abnormally.

8. Take care against injury to feet and hands from the

cutting means.

No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 8

10/20/21 12:02 PM

Содержание NMBC1000



















































Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды

Kingfisher NMBC1000, Оригинальное руководство пользователя

Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды