Kingfisher NMBC1000 Скачать руководство пользователя

Страница: 10 / 50

NMBC1000

Getting

started...

Safety information

Safety warnings

Before use, check the supply cord and any

extension cord for signs of damage or aging. Do

not use the machine if the cord is damaged or worn.

If the cord is damaged or worn during use, switch

off the machine and do not touch the cord before

disconnecting it from the supply. A damaged supply

cord or extension cord may result in electric shock, fire

and/or serious injury.

Follow instructions for changing accessories.

Improperly tightened blade securing nuts or bolts

may either damage the blade or result in it becoming

detached.

The rated rotational speed of the blade must be

at least equal to the maximum rotational speed

marked on the machine.

Blades running faster than

their rated rotational speed can break and fly apart.

Wear eye, ear, head and hand protection.

Adequate

protective equipment will reduce personal injury by

flying debris or accidental contact with the cutting line

or blade.

While operating the machine, always wear safety

footwear. Do not operate the machine when

barefoot or wearing open sandals. This reduces the

chance of injury to the feet from contact with a moving

cutter, line or blade.

10.

While operating the machine, always wear long

trousers. Exposed skin increases the likelihood of

injury from thrown objects.

11.

Keep bystanders away while operating the

machine. Thrown debris can result in serious personal

injury.

No name_MNL_NMBC1000_1000W 2-in-1 Brush cutter_GB_V2_211020.indd 10

10/20/21 12:02 PM

Содержание NMBC1000



















































Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды

Kingfisher NMBC1000, Оригинальное руководство пользователя

Результаты поиска

Содержание NMBC1000

Отзывы:

Похожие инструкции для NMBC1000

Бренды по названию

Популярные бренды