kinetic GymAware PowerTool, Руководство пользователя

Страница: 27 / 32

Trouble Shooting
PowerTool Hardware
6
There are two types of Reset/Disconnect that you can perform. If you want to disconnect the PowerTool or don’t know which
device it is paired to then use the “Hard Reset” - watch the video below. If the sensor is not working as it should then a “Full Reset”
needs to be done. This will disconnect the PowerTool as well as rebooting the sensor.
Hard Reset
Sometimes you may need or want to reset your PowerTool. For example, the device
becomes unresponsive with the LEDs on, OR you have accidently auto-connected to
the wrong iOS device and want a quick disconnect.
To watch the video tutorial visit: https://www.youtube.com/watch?v=Q5oQ80DuR_M
ISSUE: Resetting the PowerTool
To perform a Hard Reset position the magnets in the
middle of the silicon tube (at the base of the Velcro
Strap) directly on the path of the curve.
You will hear the PowerTool disconnect beep.
On older versions of the PowerTool this will
be directly under the “G”