kinetic GymAware PowerTool, Руководство пользователя

Страница: 24 / 32

LED Status What does it mean
Red Flashing Battery is going flat and needs charging
None Sleep mode - pull the tether to awaken
the PowerTool.
If no LED’s flash after pulling tether this
could mean the battery is flat or faulty.
Green/Orange/Red Try a hard reset. Contact Kinetic if this
does not fix the issue.
Trouble Shooting
PowerTool Hardware
6
What do the indicator LED’s mean?
The PowerTool LED’s can be either Green, Orange or Red. Depending on the LED’s state - solid or flashing correlates to the
state of the PowerTool. Use the table below to diagnose the state of the PowerTool at any time.
LED Status What does it mean
Green Connected to an iOS device and
App in use.
Green Flashing Waiting for a connection - trying to
pair
Orange Connected to an iOS device but the
App isn’t in use
Orange Flashing Attempting auto-connect to an iOS
device without the App being in
use.
Steady Red and
Flashing Green
Bluetooth communications problem
and attempting to reconnect.
Switch off Bluetooth on devices that
are not connected to a Bluetooth
peripheral.
Re-set the PowerTool and retry.
Steady Orange,
flashing Red and
Green, repeated
beeping, yellow
charge indicator
The unit is on charge and the
battery voltage is at a level which
causes this behavior. Allow the
charging to continue for several
minutes and the behavior will cease.
PowerTool LED
In this state the unit
is connected to an
iOS device without
the GymAware App
in use.
In this picture the
LED is Orange.