Make sure Bluetooth is
ON
.
In this setting, wake up the
PowerTool by pulling the
tether.
When the PowerTool beeps,
stop pulling the tether.
The PowerTool name should
now appear on the iOS’
Bluetooth device list (this
will match the serial number
located on the lid of the
PowerTool or underneath for
the older models.
As this is the first connection
between the PowerTool and
iOS device, the iOS device
will prompt you (as above):
press
Pair.
Initial Setup - Manual Pairing
2
The LED will
change
from orange to
green
and will
start flashing
. This indicates that the PowerTool is
ready to pair.
Содержание GymAware PowerTool
Страница 1: ...gymaware com USER GUIDE...
