kinetic GymAware PowerTool, Руководство пользователя

Страница: 26 / 32

Trouble Shooting
PowerTool Hardware
6
PowerTool emits two long beeps and
switches off when tether pulled.
The PowerTool battery needs recharging.
Plug in the provided charger and ensure
the “charge” LED turns on to indicate
charging is occurring.
ISSUE: Battery Warnings
The red LED starts flashing when the
tether is not being pulled.
The Battery is starting to go flat.
Put the PowerTool on charge as soon
as you can.
The PowerTool continuously beeps and
the red LED flashes when the tether is
not being pulled
The PowerTool battery is nearly flat and
will power off very shortly.
Put the PowerTool on charge immediately
after the current set has been completed.
The “charge” LED will be orange when the
unit is charging.
When it is fully charged, the LED will turn
green until the charger is removed then the
green light will disappear.
Never charge a PowerTool with a different
charger as this may result in frying the
circuit board.