kinetic GymAware PowerTool, Руководство пользователя

Страница: 25 / 32

LED Status What does it mean
Red Flashing Battery is going flat and needs charging
None Sleep mode - pull the tether to awaken
the PowerTool.
If no LED’s flash after pulling tether this
could mean the battery is flat or faulty.
Green/Orange/Red Try a hard reset. Contact Kinetic if this
does not fix the issue.
Trouble Shooting
Bluetooth
6
If you see the Pairing Unsuccessful screen then the PowerTool
or iOS device has timed out (it may have switched off).
Select the PowerTool device from the list again. It should now
automatically connect.
First allow the PowerTool to enter sleep mode.
It will go to sleep when there is no connection from an iOS
device and no movement of the tether for 1 minute.
This will be indicated by no illumination of the LED. When it first
enters sleep mode there will be a quadruple beep.
Next, wake up the PowerTool by pulling the cord once and
listening for a beep. The green LED should be flashing.
ISSUE: Pairing Unsuccessful
If this doesn’t work, forget the PowerTool device from the device
list - see over the page.
Once it is forgotten you can pair the device manually and then
continue as if it were an initial setup.
If this doesn’t work, the iOS device will need a complete power
down. You can then pair the device manually as in step 2.