46
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of
the projector.
H-sync freq .
V-sync freq .
Lamp counter
The horizontal frequency of the input signal is displayed in
KHz, or - - - - - when no signal.
The vertical frequency of the input signal is displayed in Hz,
or - - - - - when no signal. Numbers of Hz doubles when
during Interlace.
The cumulative lamp operating time is displayed.
Direct Operation
Press the
INFO.
button on the remote control to display the
Information Menu.
INFO.
button
Remote Control
Press Input on the Top Control and then press SELECT
button to display on screen menu. Press the Point
▲▼
buttons to select the Information. The Information Menu is
displayed.
See below for displayed information.
Menu Operation
Input
Language
The selected input source is displayed.
The selected language is displayed.
Information
Key lock
Display Off, Remote Control or the Projector.
Power management
Off, Ready, Shut down or Timer is displayed.
Screen
The selected screen size is displayed.
Lamp status
The selected lamp mode is displayed.
PLC-EN.indd 46
2009-11-17 10:03:31
