�tandby mode
This function is available when operating the projector via network.
Normal ...... Supply the power to the network function even after turning off the projector. You can turn on/ off
the projector via network, modify network environment, and receive an e-mail about projector
status while the projector is powered off.
Eco ........... Select Eco when you do not use the projector via network. The projector’s network function will
stop when turning off the projector.
Clo�ed Caption
Closed Caption is a text version of the program sound or other information displayed on the screen.If the input
signal contains closed captions, you can turn on the feature and switch the channels. Press the Point
▲▼
buttons to select Off, CC1, CC, CC3 or CC4.
If the closed caption is not clear, you can change the text from Color to white.
NOTE:
The Closed Caption is available only under the situation below.
• When the input signal is NTSC of composite and S-video, and the system is set according to the signal or
set on
Auto
.
• The system must be set on
NT�C
or
Auto
in Video System Selection. (P.39)
• The icon of Closed Caption is displayed in gray while it is not available.
• The Closed caption is unavailable when On-Screen menu and Timer are displayed.
�etting
This function allows you to change brightness of the screen.
Normal ...... Normal brightness
Eco ............ Lower brightness reduces the lamp power consumption and extends the lamp life.
Lamp Control
Key lock
�ecurity (Key lock and PIN code lock)
This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
Select
Key lock
and then press the S�L�C�� button, and select the desired item by pressing the Point ▲▼
buttons.
Off .................. Unlocked.
Projector ........ Lock the operation of the top control. To unlock, use the remote control.
Remote Control ..... Lock the operation of the remote control. To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby or there is
something wrong with your remote control, contact the dealer where you purchased the projector or the
service center.
This function allows you to use the Key lock and PIN code lock function to set the security for the projector
operation.
�etting
This function enables you to test & set interior signals.
Pattern
PLC-EN.indd
00-11-1 10:0:0
