0
Logo PIN code lock
Use the Point
▲▼ buttons to enter a number. Press the Point ►� button to fix the number and move the red
frame pointer to the next box. ��he number changes to “*”. If you fixed an incorrect number, use the Point ��
button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a three-digit
number.
After entering the three-digit number, move the pointer to Set. Press the SELECT button so that you can start
to operate the projector.
If you entered an incorrect Logo PIN code,
Logo PIN code
and the number (***) will turn red for a moment.
Enter the correct Logo PIN code all over again.
Logo PIN code can be changed to your desired three-
digit number. Press the SELECT button to select
Logo
PIN code change
.
Logo Pin code
dialog box appears,
use the Point
▲▼
buttons to enter the correct code. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code, confirmation box appears, choose
ye�
to
set the new Logo Pin code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
Use the Point
▲▼
buttons to switch
On
or
Off
, and then
press the SELECT button to make a choice.
Change the Logo PIN code lock �etting
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO . MEMO ON PAGE 58, AND
KEEP IT �ECURELY . �HOULD THE LOGO PIN CODE
BE LO�T OR FORGOTTEN, THE LOGO PIN CODE
�ETTING CAN NO LONGER BE CHANGED .
�etting
Logo PIN code change
�etting
PLC-EN.indd 0
00-11-1 10:0:
