Kindermann KX 400C, Руководство пользователя

Страница: 52 / 62

Appendix
Trouble�hooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When the projector does not project an image from the connected computer, restart the computer.
Problem: – Solutions
No power – Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait until the POWER indicator stops blinking to turn on the
projector again. The projector can be turned on after
the POWER indicator turns red.
– Check the WARNING indicator. If the WARNING indicator lights red,
projector cannot be turned on.
– Check the projection lamp.
– Unlock the Key lock function for the projector.
The initial display is not shown – Make sure Off or Countdown off are not chosen at display
function.
The initial display is not same
as the default set .
– Make sure User or Off are not chosen at Logo (select)
function.
Input signal switches automatically.
(or does not switch automatically)
– Make sure Input search function is adjusted properly.
when the projector is on and you press
the input button, an icon other than the
Lamp mode icon appears.
– That is the Filter warning icon.
An icon other than Input mode or
Lamp mode icon appears .
– That is the Lamp replacement icon or the Filter warning
icon.
Image is out of focus. – Adjust focus of the projector.
– Provide proper distance between the projector and the projection
screen.
– Check the projection lens to see if it needs cleaning.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
Image is Left/Right reversed.
Image is Top/Bottom reversed.
– Check the Ceiling/Rear function.
– Check the Top/Bottom (Ceiling) function.
Picture is not bright enough. – Check if the Contrast or Brightness are adjusted properly.
– Check if Image mode is selected properly.
– Check the lamp control function.
– Check the LAMP REPLACE indicator. If it lights, the end of lamp life
is approaching. Replace the lamp with a new one promptly.
Appendix
PLC-EN.indd 00-11-1 10:0: