38
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point
▲▼
buttons to select one of the following options.
Off ........... Input search will not work.
On........... ..Active Input Sourcing fuction. It detects the
input signal and search stops when the signal is
found.
Auto PC Adjustment
On........... ..Press Auto Set button on the Top Control or
remote control to enable Auto PC Adjustment
function.
Off ........... Disables Auto PC Adjustment.
Manual Input
Activate this function by presing Auto Set on the Top Control
or the Remote Control.
NOTE:
•
Only the last selected input source can be
detected.
•
If the INPUT button on the top control or
the COMPUTER 1/2 buttons, VIDEO or
S-video or COMPONENT buttons on the
remote control is pressed during Input
search is in progress, Input search will stop
and go back to the previous input signal.
•
Fine sync.
,
Total dots
,
Horizontal
and
Vertical
position of some computers
can be fully adjusted with the Auto PC
Adjustment function. When the image is
not provided properly with this operation,
manual adjustments are required.
This function enables Input search, Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP button
on the top control or the AUTO SET button on the remote
control. Settings for those functions can be altered as follows:
Setting
Keystone Correction
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point
▲▼
buttons to switch between each option.
Store
...... ...... Keep the keystone correction even when
the AC power cord is unplugged.
Reset
...... ...... Release the keystone correction when the
AC power cord is unplugged.
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point
▲▼
buttons to correct keystone distortion.
Background (Blue)
Select the background screen for when no input signal is
detected. Press the Point
▲▼
buttons to switch between
each option.
On
On .............. Open background in blue color
Off .............. Close background in blue color
PLC-EN.indd 38
2009-11-17 10:03:29
