Kimo Kigaz 300 CLA, Руководство пользователя

Страница: 47 / 52

6. Set the analyser
LIGAZ software allows to set the analyser. It is possible to :
•
set the combustibles
•
set the references (O
2
, Altitude, atmospheric pressure)
•
set the operators
•
get details about sensors
•
set date and time
•
set the header of printing
•
see the battery level
•
get information about the analyser, update it and send report to after-sales service
➢
Connect the analyser to the computer with the supplied USB cable.
➢
Connect the analyser on main power thanks to the supplied adapter to avoid extinguishing of the analyser (low battery).
➢
Click on “KIGAZ” in the menu bar.
➢
Go down to
“Setting”
then click on the parameter to modify.
“KIGAZ settings” window opens.
Changing parameters of the analyser has consequences on performed measurements and on the analysis calculation. Only
a qualified technician is empowered to change the parameters of the device.
6.1. Change the combustibles
This window allows to change the list of combustibles programmed in the analyser. It also allows to modify features of each combustibles.
“ KIGAZ settings”
window is open on
“Combustibles”
.
➢
Double-click on one of the combustible features to modify.
➢
Enter the new value for the feature.
➢
Click on “Transfer combustibles” button to send modifications to the analyser.
6.2. Change the references
This window allows to modify the O
2
reference (oxygen level in which the analyser is used), altitude (altitude in which the analyser is used) and
atmospheric pressure (pressure in which the analyser is used).
“KIGAZ settings” window is open on “References” .
➢
Click on the field to modify.
➢
Enter the new value.
➢
Click on “Transfer references” button to send modifications to the analyser.
6.3. Manage the operators
This window allows to add, delete or modify an operator.
“KIGAZ settings”
window is open on
“Operators”
.
➢
Double-click on “Name” column to enter the operator name.
➢
Click on “Transfer operators” button to send modifications to the analyser.
6.4. Change date and time
This window allows to de sync the analyser time and the computer time.
“KIGAZ settings”
window is open
“Date/time”
.
➢
Click on “Set to local time” button to adjust analyser time to computer time.
6.5. Sensors state
This window allows to access to sensors features of the connected analyser. These features are :
•
type of sensor (CO, NO,...)
•
state of sensor (connected, not connected...)
•
serial number of the sensor
6.6. Battery level
This window allows to see the battery level of the analysis. The analyser must turned on and on battery.
6.7. Set printings
This window allow to enter the 4 header lines of the ticket printed by the analyser.
Set the analyser
47
netzerotools.com
netzerotools.com