Kimo Kigaz 300 CLA, Руководство пользователя

Страница: 32 / 52

17. Perform a CH
4
measurement
There are 2 possibilities to measure CH
4
:
•
Thanks to the internal sensor (optional)
•
Thanks to an external probe (SDFG option probe)
17.1. Perform the measurement with the probe
➢
Connect a CH
4
probe on C1 connection on the bottom of the analyser.
➢
Turn on the analyser.
➢
Go to
“Measurement”
menu with the rotative button then press
OK
.
The analyser performs the autozero : remaining time and a progress bar display on the screen. However it is possible to reach the gas
leak detection menu during the autozero.
➢
Go to
“Gas leak detection”
with the rotative button then press
OK
.
➢
Press OK to launch the measurement.
If the probe is connected for more than 1 minute, the measurement screen appears and indicates the concentration and places it on a
bargraph.
If the probe has just been connected, the screen indicates the remaining time of warming.
The measurement begins, the analyser displays the CH
4
level.
17.2. Perform the measurement with the sensor
➢
Turn on the analyser.
➢
Go to “Measurement” menu with the rotative button then press OK .
The analyser performs the autozero : remaining time and a progress bar display on the screen.
➢
Go to “Combustion” with the rotative button then press OK .
The analyser launches the combustion analyse. The measured CH
4
value appears at the bottom right of the screen.
17.3. Link the measurement to a customer
When the measurement has been performed, it is possible to link it to a customer registered in the analyser or to a customer unregistered in the
analyser that must be created.
➢
Press the function key to save.
The analyser displays the list of registered customers.
➢
Select a customer with the rotative button then press OK or create a new customer (see page 20) then select it. The analyser displays the
list of available boilers.
➢
Select the boiler with the rotative button then press OK or create a boiler (see page 21) then select it.
The analyser backs to the screen CH
4
measurement.
17.4. Print the measurement on the ticket
When the measurement is stable, it is possible to print it on the ticket.
➢
Press the function key to print it.
The value is printed on the ticket
32
Perform a CH4 measurement
netzerotools.com
netzerotools.com