Kimo Kigaz 300 CLA, Руководство пользователя

Страница: 29 / 52

14. Perform some temperature measurements
14.1. Perform a measurement of ambient temperature
➢
Connect a probe of Pt100 temperature (available as option) on C1 connection on the top of the analyser.
➢
Turn on the instrument
Home screen is displayed with measurement menu at the forefront.
➢
Press OK .
The analyser performs the autozero : remaining time and a progress bar display on the screen. However it is possible to reach the
temperature menu during the autozero.
➢
Go to “Ambient Temp.” with the rotative button then press OK .
The temperature detected by the Pt100 probe is displayed on the analyser.
14.2. Perform a measurement of flue gas temperature
➢
Connect the flue gas probe on the analyser.
➢
Turn on the analyser..
Home screen is displayed with measurement menu at the forefront.
➢
Press OK .
The analyser performs the autozero : remaining time and a progress bar display on the screen. However it is possible to reach the
temperature menu during the autozero.
➢
Go to “Flue gas Temp.” with the rotative button then press OK.
The screen displays the flue gas temperature detected by the thermocouple probe of the flue gas probe.
14.3. Perform an ambient temperature measurement with the internal sensor
➢
Turn on the
instrument
Home screen is displayed with measurement menu at the forefront.
➢
Press OK .
The analyser performs the autozero : remaining time and a progress bar display on the screen. However it is possible to reach the
temperature menu during the autozero.
➢
Go to “Internal Temp.” with the rotative button then press OK .
The screen displays the NTC temperature detected by the analyser.
14.4. Perform a dewpoint temperature measurement
The dewpoint temperature is measured during a flue gas analysis.
➢
Connect the flue gas probe.
➢
Turn on the instrument.
Home screen is displayed with measurement menu at the forefront.
➢
Press OK .
The analyser performs the autozero : remaining time and a progress bar display on the screen.
When the autozero is finished :
➢
Press OK on “Flue gaz analysis”.
➢
Select the combustible of the boiler then press
OK
.
The flue gas analysis is ongoing.
➢
Turn the rotative button to reach the screen where dewpoint temperature is displayed.
14.5. Link the measurements to a customer
When the measurement has been performed, it is possible to link it to a customer registered in the analyser or to a customer unregistered in the
analyser that must be created.
➢
Press the function key to save.
The analyser displays the list of registered customers.
➢
Select a customer with the rotative button then press OK or create a new customer (see page 20) then select it. The analyser displays the
list of available boilers.
➢
Select the boiler with the rotative button then press OK or create a boiler (see page 21) then select it.
The analyser backs to the screen of temperature measurement.
14.6. Print the measurement on the ticket
At the end of the measurement, it is possible to print it on the ticket.
➢
Press the function key to print it.
The value is printed on the ticket
Perform some temperature measurements
29
netzerotools.com
netzerotools.com