Kilsen KFP-CE4 Series, Руководство по установке

Страница: 37 / 92

Chapter 3: Configuration and commissioning
KFP-CE4 Series Installation Manual 31
Display Menu Values
Panel mode NEN 2575 4E
NEN 2575 2E
NEN 2575 1E
Custom
Fire routing delay 00 to 10 minutes
Extended fire routing delay 00 to 10 minutes
Add an expansion board [1] 00 to 04 modules
Fire network identifier [2] 00 to 32
Restore previous configuration N/A
Restore factory configuration N/A
Exit without saving N/A
Exit and save N/A
[1] Additional menu options are available if one or more expansion boards are installed. See
“ Expansion board configuration” on page 46 .
[2] Additional menu options are available if the panel is configured for connection to a fire network
(i.e. the fire network identifier is not 00). This requires an optional fire network board. See the
topics “Connecting a fire network” on page 18 and “Fire network and repeaters configuration” on
page 46.
Basic default configuration
Use this menu to select common operating mode configuration presets. The
default setting is 41.
To select an operating mode configuration preset:
1. Set the display as shown below, and then press Enter.
2. Select a value using the value selection buttons (2 and 4).
See Table 19 on page 32 for descriptions of the presets.
3. Press Enter.
4. Save your changes.