Kikusui DME1600, Руководство пользователя

Страница: 15 / 56

DME1600
15
MEASure Commands
Messa
ge Ref
e
re
nce
2
MEAS:FRES
Starts 4-wire resistance measurement with the specified range and resolution settings. Mea-
sured values are sent to the output buffer.
Command
MEASure:FRESistance?
{<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}
MEAS:FREQ
Starts frequency measurement with the specified range and resolution settings. Measured
values are sent to the output buffer. In frequency measurement, the DME1600 uses a single
range for all input and output signals from 3 Hz to 300 kHz. If no signal is applied, the mea-
sured frequency is zero.
Command
MEASure:FREQuency?
{<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}
MEAS:PER
Starts period measurement with the specified range and resolution settings. Measured values
are sent to the output buffer. In period measurement, the DME1600 uses a single range for all
input and output signals from 0.33 s to 3.3

s. If no signal is applied, the measured period is
zero.
Command
MEASure:PERiod?
{<range>|MIN|MAX|DEF},{<resolution>|MIN|MAX|DEF}
MEAS:CONT
Starts continuity testing with fixed settings. Measured values are sent to the output buffer. The
range is fixed at 1 k

, and the resolution is fixed at 5 1/2 digits.
Command
MEASure:CONTinuity?
MEAS:DIOD
Starts diode testing with fixed settings. Measured values are sent to the output buffer. The
range is fixed at 1 Vdc with a 1 mA current source, and the resolution is fixed at 5 1/2 digits.
Command
MEASure:DIODe?
MEAS:TEMP
Starts RTD temperature measurement with fixed settings. Measured values are sent to the
output buffer.
Command
MEASure:TEMPerature?
MEAS:TCO
Starts thermocouple temperature measurement with fixed settings. Measured values are sent
to the output buffer.
Command
MEASure:TCOuple?