Kikusui DME1600, Руководство пользователя

Страница: 25 / 56

DME1600
25
Measurement Configuration Commands
Messa
ge Ref
e
re
nce
2
ROUT:TERM
Queries whether the front panel or rear panel input terminals are selected.
Command
ROUTe:TERMinals?
Response
In response to ROUT:TERM?, the DME1600 returns “FRON” or “REAR.”
The following commands are for models that are equipped with a
scanner card.
ROUT:CLOS
Sets the channels to close (the channel range is from 1 to 10).
Command
ROUTe:CLOSe <channel>
ROUTe:CLOSe?
Response
In response to ROUT:CLOS?, the DME1600 returns the closed channels.
ROUT:OPEN
Opens all channels.
Command
ROUTe:OPEN
ROUT:STAT
Returns the scanner card state after scanning.
Command
ROUTe:STATe?
Response
In response to ROUT:STAT?, the DME1600 returns 0 (means it hasn’t been inserted yet.),
1 (means the 10-channel scanner card was inserted.), 2 (means the 20-channel scanner
card was inserted.), or 3 (means the thermocouple scanner card was inserted.).
ROUT:SCAN:FUNC
Sets the measurement function for a channel on the scanner card to VDC, VAC, frequency, 2-
wire resistance, 4-wire resistance, or thermocouple temperature measurement or disables
the channel.
Command
ROUTe:SCAN:FUNCtion <channel>,{<function>|“VOLT:DC”|“VOLT:AC”
|“FREQuency”|“RESistance”|“FRESistance”|“TCOuple”|“NONE”}
ROUTe:SCAN:FUNC? <channel>
Response
In response to ROUT:SCAN:FUNC? <channel>, the DME1600 returns the measurement
function for a channel on the scanner card.