manualshive.com logo in svg

Kikusui BIM1000 Series, Руководство пользователя

Поделиться
Скачать
Kikusui BIM1000 Series Скачать руководство пользователя страница 9

BIM1000 Series

User’s Manual

9

Installation and Preparation

Connecting the Power Cord

This product is designed as an equipment of IEC Overvoltage Category II (energy-consuming equipment 
supplied from a fixed installation).

1

Turn off ( ) the POWER switch on the front panel.

2

Check that the AC power line meets the nominal input rating of the product.

The product can receive a nominal line voltage in the range of 100 Vac to 240 Vac at 50 Hz or 
60 Hz. (Frequency range: 47 Hz to 63 Hz)

3

Connect the power cord to the AC INPUT inlet on the rear panel.

4

Connect the power cord plug to an outlet with a ground terminal.

This completes the connections.

WARNING

Risk of electric shock.

• This product is IEC Safety Class I equipment (equipment with a protective con-

ductor terminal). To prevent electric shock, be sure to connect the protective 
conductor terminal of the product to electrical ground (safety ground).

• The product is grounded through the power cord ground wire. Connect the pro-

tective conductor terminal to earth ground.

• Use the supplied power cord to connect to the AC line.

If the supplied power cord cannot be used because the rated voltage or the plug shape 
is incompatible, have a qualified engineer replace it with an appropriate power cord 
that is 3 m or less in length. If obtaining a power cord is difficult, contact your Kikusui 
agent or distributor.

• Do not use the supplied power cord with other instruments.
• The power cord with a plug can be used to disconnect the product from the AC power 

line in an emergency.

• Secure adequate space around the power plug. Do not insert the power plug to an out-

let where accessibility to the plug is poor. And, do not place objects near the outlet that 
would result in poor accessibility to the plug.

Содержание BIM1000 Series































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды