Kikusui BIM1000 Series, Руководство пользователя

Страница: 34 / 94

34
User’s Manual
BIM1000 Series
External Control | Control and Monitor
Recalling memories
You can recall memories by applying signals to PM0 (pin 1) to PM7 (pin 8) of the SIGNAL I/O connector
according to the memory number you want to recall and setting STB (pin 9) to low level and then back to
high level.
1
Apply the signals in the following table to PM0 to PM7 according to the memory
number you want to recall.
Enter the memory number (0 to 99) using a 2-digit BCD code. Apply signals one bit at a time to
PM7 to PM0 with 1 as low level (L) and 0 as high level (H).
2
Change STB from high level to low level and hold it for at least 1 ms. Then, set it
back to high level.
The memory entry is recalled.
Memory
number MSB LSB
PM7 PM6 PM5 PM4 PM3 PM2 PM1 PM0
0 H H H H H H H H
1 H H H H H H H L
2 H H H H H H L H
3 H H H H H H L L
･
･
･ ･
･
･ ･
･
･ ･
･
･ ･
･
･ ･
･
･ ･
･
･ ･
･
･ ･
･
･
97 L H H L H L L L
98 L H H L L H H H
99 L H H L L H H L
ON
OFF
10 µ s or more 1 ms or more 7 ns or more
PM0 to PM7
STB