Step 48: Attach Ground Stakes
Hardware
2 x
#12 x 2” Pan Screw
Other
2 x Rebar Ground Stake
S7
Fig. 48.1
Fig. 48.2
13”
S7
A:
In the 2 places shown in fig. 48.1 drive the Rebar Ground Stakes 13” into
the ground. Be careful not to hit the washer while hammering stakes into the
ground as this could cause the washer to break off.
B:
Attach Ground Stakes using 1 (S7) Pan Screw per Ground Stake
(Fig. 48.2).
C:
After driving stakes into the ground, check for sharp edges caused by
the impact of the hammer. Smooth any sharp edges from impact area and
touch up with outdoor paint.
Warning!
To prevent tipping and avoid potential injury,
stakes must be driven 13” into ground. Digging or driving stakes
can be dangerous if you do not check first for under-ground
wiring, cables or gas lines.
95
Содержание Cedar Summit Adventure Ridge Playset
Страница 128: ...NOTES 128...
