A:
Tie a knot in one end of the rope. (Fig. 10.4)
B:
Position (101) Top Rope so that the notched out side is facing up. Place the rope so that it sits in the notch then at the
top of the opening in the Vertical Wall place (101) Top Rope tightly against the underside of the panel. Make sure that the
knotted end of the rope is on the inside of the fort as shown
in (fig.10.1). Attach (101) Top Rope using 5 (S4) #8 x 3” Wood
Screws (fig.10.1)
C:
Tie a second knot in the rope on the opposite side of (101) Top Rope so that the knots are tight to the panel on both sides.
D:
Tie 4 knots in the rope making sure that they are evenly spaced from top to bottom. (fig. 10.2 & 10.3)
E:
Feed rope through hole in bottom of (0890) Vertical Rock Board Short Wide and pull tight. Tie off the rope securely with a
single knot. (fig.10.2 & 10.3 & 10.4)
F: IMPORTANT: MAKE SURE THE ROPE IS TIGHT
Step 10: Install Climbing Rope
Part 1
Hardware
5 x
#8 x 3” Wood Screw
S4
Wood Parts
1 x Rope
Other Parts
1 x
Top Rope 1-1/4 x 2 x 16-15/16”
101
Fig. 10.1
Inside View
Outside
Fig. 10.4
Fig. 10.3
Fig. 10.2
Rope
S4
x 5
101
0890
Rope
37
Содержание Cedar Summit Adventure Ridge Playset
Страница 128: ...NOTES 128...