1 x
5/16 x 2-1/8” Wafer Bolt (5/16” flat washer, 5/16” t-nut)
1 x
1/4 x 2-1/2” Wafer Lag (5/16” flat washer)
1 x
#8 x 3” Wood Screw
2 x
#8 x 2” Wood Screw
Hardware
Wood Parts
1 x
SW Ground 5/4 x 4 x 14-1/4”
1 x
Diagonal 1-1/4 x 3 x 22”
071
072
Step 7: Attach Diagonals
Part 1
A:
Loosely attach (071) SW Ground to (072) Diagonal with 1 (WB9) 5/16 x 2-1/8” Wafer Bolt (with flat washer
and t-nut) then place (072) Diagonal tight and flush to the front of (031) Front Wall Panel. (071) SW Ground to
be flush to the bottom of (032) SW Wall Panel. (fig. 7.1 & 7.2)
B:
Pre-drill pilot hole with a 3/16” drill bit then attach (072) Diagonal to (031) Front Wall Panel with 1 (WL5) 1/4 x
2-1/2” Wafer Lag (with flat washer), checking that it remains flush to outside edge. (fig. 7.1 & 7.2)
C:
Make sure bottom of (071) SW Ground is flush to bottom of (032) SW Wall Panel then attach with 2 (S11) #8
x 2” Wood Screws and 1 (S4) #8 x 3” Wood Screw then tighten the bolt. (fig. 7.1 & 7.2)
Fig. 7.1
Fig. 7.2
WL5
S11
S4
WB9
S4
Front Wall
SW Wall
5/16”
T-Nut
5/16” Flat
Washer
WB9
071
031
072
032
5/16” Flat
Washer
WL5
Flush
Flush
S11
30
Содержание Cedar Summit Adventure Ridge Playset
Страница 128: ...NOTES 128...