Step 42: Build Tunnel Assembly
Part 1
Other Parts
6 x MOD Tunnel Panel
nodule
connector tab
Fig. 42.3
Fig. 42.2
Fig. 42.1
MOD
Tunnel
Panel
bend here
Outside View
Inside View
A:
Bend all 6 MOD Tunnel Panels as shown in fig. 42.1
B:
Match 2 MOD Tunnel Panels together by making a slight “V” with the pieces so the peak of the “V” faces away
from you. Make sure connector tabs are coupled then straighten the 2 panels. Push down on one panel and up on
the other until you hear the connector tabs click together and the bottom edges are flush. You may have to knock
panels on a hard surface to align properly. Do this so there are 3 MOD Tunnel Panels attached together.(fig. 42.2
and 42.3)
C:
Press nodules through the connector tab holes to hold Tunnel panels in
place. (fig. 42.3)
D:
Repeat Steps B-C to create two Tunnel Sides.
88
Содержание Cedar Summit Adventure Ridge Playset
Страница 128: ...NOTES 128...
