KI CFS01, Руководство по сборке

Страница: 4 / 20

4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Monitor Arms - Monitor Mount to Extension Arm Assembly
Assembly Instructions
Monitor Mount Assembly to
Extension Arm Assembly
Important: If model includes
extension arms, follow steps 1
through 7 to install monitor mount
assembly to the extension arm
assembly.
1. Set plastic bearing onto the opening
on the extension arm (Figure 1).
2. Making sure the arrow symbol on
the faceplate of the monitor mount
assembly is facing up, place monitor
mount on top of the plastic bearing
of the extension arm (Figure 2).
3. Set bore cup and toothed locking
washer into the monitor mount
opening. Insert joint bolt through the
bore cup, toothed locking washer
and extension arm (Figure 3).
4. Insert second bore cup, plastic
washer, and metal washer through
the joint bolt on the underside of the
extension arm. Thread joint nut onto
the joint bolt (Figure 4).
5. Take
9
/
16
” socket wrenches to top of
joint bolt and bottom joint nut and
tighten to the required tension.
6. Install joint cap onto the opening of
the monitor mount (Figure 5).
7. Screw cable manager onto joint
bolt located on the underside of the
extension arm (Figure 5).
plastic
bearing
Figure 1
extension arm
assembly
extension arm
assembly
plastic
bearing
Figure 2
monitor mount
assembly
faceplate
Figure 3
monitor mount
bore
cup
toothed locking
washer
joint
bolt
extension arm
assembly
Figure 4
bore
cup
metal
washer
plastic
washer
extension arm
assembly
joint nut
Figure 5
extension arm
assembly
joint cap
cable
manager