5
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Monitor Arms - Single Screen Monitor Arm - Model CFS01
Assembly Instructions
pole assembly
Figure 1
worksurface
pole cap
mounting system
(clamp mounting
shown)
pole assembly
Figure 2
support
ring
worksurface
pole assembly
Figure 3
support
ring
worksurface
monitor mount
assembly
(includes bushing)
trim ring
pole cap
pole assembly
Figure 4
support
ring
worksurface
monitor
cables
support
ring tab
Single Screen Monitor Arm
Assembly - Model CFS01
1. If pole assembly mounting systems
have not been installed, reference
“Clamp Mounting Systems”
instructions on page 1, or “Drill
Mounting Systems” instructions on
page 2 before continuing (Figure 1).
2. Twist the pole cap off the pole
assembly, but save to place back on
pole once all components have been
installed (Figure 1).
3. Slide the support ring down the pole
to the desired height of the monitor
screen. Twist the knob on the support
ring to secure in place (Figure 2).
4. Place monitor mount assembly down
the pole on top of the support ring
(Figure 3).
5. Mount the trim ring on top of the
monitor mount assembly followed by
re-installing the pole cap on top of
the pole assembly (Figure 3).
6. Insert monitor cables through
support ring tabs as required
(Figure 4).
7. To properly install monitor screen to
the faceplate of the monitor mount
assembly, reference “Mounting the
Monitor” instructions on page 17.
Содержание CFS01
Страница 19: ...19 Monitor Arms Assembly Instructions...