31
Side Guards
Side Guard Receiver
NOTE: If you are installing the composite side guard receiver, the hardware and outer cross tube
clamp will be removed before installing the new.
1. Install the side guard clamp (B) and crosstube mount (C) onto frame with two screws (A) and two nuts
(D) using a 5mm Allen wrench and a 10mm wrench. When installing the composite side guard receiver,
the crosstube mount is already installed on the crosstube.
Removable Adult Side Guard
1. Install the adult side guard (D) onto the side guard post (C) with two screws (A) using a 4mm Allen
wrench. On the opposite side, install the side guard post stop (B) with a screw (A) using a 4mm Allen
wrench.
NOTE: There are two sets of holes that the side guard post (C) can be installed onto the side guard
with. Choose the holes that place the side guard in the desired position. The height is also adjusted
with the hole that the side guard post stop (B) is installed in.
A
B
C
D
Composite Side Guard Receiver
Fender Side Guard Receiver
Low
Mid
High
A
B
C
D
E
