23
Canopy
Installation
1. Install tube mount (C), inner clamp (B), outer clamp (D), barrel nut (A), spherical washer (E) and bolt (F)
onto backrest tube using a 5mm Allen wrench. Repeat on opposite side.
NOTE: The clamps may need to be rotated to accomodate the chair width while remaining in the
correct distance for the stems. See the chart below if a different canopy size is needed.
2. Drop the canopy assembly stems into the tube mounts. Ensure latch catches to secure the canopy
assembly in the tube mounts. For rain, ensure the fabric around the edge is folded to create the
channel which catches water and dispenses it behind the chair.
Canopy Size
Stem Distance
Available Chair Widths
Small
Medium
Large
12”
14”
16”
10W - 14W
12W - 16W
14W - 18W
Stem
Distance
Chair Width
Rotate clamps around back
canes to achieve proper stem
distance for canopy size.
Completed
Back Side
of Chair
A
B
C
D
E
F
Front Side
of Chair
Latch
catches
bottom of
tube mount.
Fully Assembled
During rain, the fabric
channel around the edge
catches water and
dispenses toward rear of
chair.
