40
Cross Tube
1. Install the cross tube (F) to the inside clamp (D) with two screws (C) using a 5mm Allen wrench. Repeat
on opposite side.
2. Install the cross tube assembly to the chair frame by installing two screws (A) and two nuts (E) through
the inside clamp to the outside clamp (B) using a 5mm Allen wrench. Repeat on opposite side.
NOTE: A different outside clamp is used when composite side guards or T-Arms are used. See
image below for the clamps used in those configurations.
A
B
C
D
E
F
Clamp used when
composite side
guards are used.
Clamp used when
T-Arms are used.
