17
Rigid Stroller Handle
1. Install the stroller handle clamp (E & G) onto the rigidizer bar and secure with two screws (I) and a set
screw (H) using a 5mm Allen wrench and a 2.5mm Allen wrench. The clamps can be installed in the
straight mount configuration or the angled mount configuration. See image below.
2. Install the backpost (C), with the handles (A) and plugs (B) installed, into the clamp and secure by
installing the clamp handle (D) and nut (F) using a 10mm wrench.
NOTE:
The detent button on the bottom of the back post will click into place when properly
installed.
Ergo Stroller Handle
1. Install the ergo stroller handle clamp (F & H) onto the middle of the rigidizer bar and secure with two
screws (I) and a set screw (J) using a 5mm Allen wrench.
2. Install the backpost (C), with the handle (A) and plug (B) installed, into the clamp and secure by
installing the clamp handle (E) and nut (G) using a 10mm wrench.
NOTE:
The detent button (D) on the bottom of the back post will click into place when properly
installed.
Straight Mount
Configuration
Angled Mount
Configuration
A
B
B
C
D
E
F
G
H
I
A
B
C
D
E
F
G
H
I
J
