14
Relaxed Back
To adjust the backrest angle:
1. Loosen 6mm screw (A) on outside of backrest plate. Do this to each side of backrest.
2. Remove 5mm screw (B) on outside of backrest plate. Do this to each side of backrest.
3. Once desired backrest angle is achieved, realign holes in pivot bracket (C).
4. Reinsert 5mm screw through locating holes and tighten. Repeat on other side of backrest.
5. Retighten 6mm screw (A). Repeat on other side of backrest.
NOTE: Lowering backrest height or changing the back angle may decrease rearward stability.
Always make adjustments in small increments and check the stability of your chair with a spotter to
prevent a tip-over.
A
B
C
