13
Backrest Assembly
4. Install release cable (A) with pin receiver (B), release spring (C), lockout pin (D) and spacer (E). Use Blue
Loctite on the threaded end of release cable before assembly. Repeat on opposite side.
NOTE: The spacer (E) is not used if Swing Away Armrests are being used.
Relaxed Back
Relax Back Feature:
This chair can be adjusted for a slight recline upon releasing the back release cable (A). This is referred to
as the "relax back feature." 1°, 3° and 6° are available.
To adjust, use a 3mm Allen key to disassemble the backrest stop (A & C) and reassemble in the desired
position on both sides.
A
B
C
D
E
Apply
Loctite
Here
A
B (1°)
C
3°
6°
