Keysight N6705, Руководство по обслуживанию

Страница: 129 / 135

Error Messages Appendix A
Model N6705 Service Guide 129
Command Errors (continued)

108
Parameter not allowed
More parameters were received than were expected.
 109 Missing parameter
Fewer parameters were received than were expected.
 110 Command header error
An error was detected in the header.
 111
Header separator error
A character that was not a valid header separator was found in the command string.
 112 Program mnemonic too long
The header contains more than 12 characters.
 113
Undefined header
A command was received that was not valid for this instrument.
 114 Header suffix out of range
The value of the numeric suffix is not valid.

120
Numeric data error
Generic numeric data error.
 121 Invalid character in number
An invalid character for the data type was found in the command string.

123
Exponent too large
The magnitude of the exponent was larger than 32000.
 124 Too many digits
The mantissa of a numeric parameter contained more than 255 digits, excluding leading zeros.
 128 Numeric data not allowed
A numeric parameter was received but a character string was expected.
 130 Suffix error
Generic suffix error
 131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter.
 134
Suffix too long
The suffix contains more than 12 characters.
 138 Suffix not allowed
A suffix is not supported for this command.

140
Character data error
Generic character data error
 141 Invalid character data
Either the character data element contains an invalid character, or the element is not valid.

144
Character data too long
The character data element contains more than 12 characters.
 148 Character data not allowed
A discrete parameter was received, but a string or numeric parameter was expected.

150
String data error
Generic string data error
 151 Invalid string data
An invalid character string was received. Check that the string is enclosed in quotation marks.
 158 String data not allowed
A character string was received, but is not allowed for this command.
 160
Block data error
Generic block data error
 161 Invalid block data
The number of data bytes sent does not match the number of bytes specified in the header.