Keysight M9521A, Руководство для стартапов

Страница: 21 / 38

Keysight M9521A AXIe System Module Startup Guide 21
Step 6: Install IO Libraries Suite and Connect to the Web Interface
Step 6: Install IO Libraries Suite and Connect to the Web Interface
This step describes how to install the Keysight IO Libraries Suite and verify that
the chassis can be found by Keysight Connection Expert, which is part of IO
Libraries Suite.
You can use either the M9521A Web Interface or the M9521A Soft Front Panel
(SFP) to monitor and control the ASM, including triggering, configuring the ASM
LAN ports, and monitoring basic health of the ASM. In this step, the Web
Interface is used to verify that the host PC can communicate to the chassis.
Using the SFP to monitor and control the chassis is described in the M9521A
ASM Soft Front Panel Help File .
Host PC Requirements
To install and run the required software (Microsoft.NET, Keysight IO Libraries
version 17.1 or later, and chassis device drivers), the host PC requires the
following:
Keysight’s M9536A AXIe Embedded Controller requires Windows Embedded
System 7 32- or 64-bit Operating System. 8 GB RAM minimum recommended.
IMPORTANT: The installation and setup information in this manual
is generic.
Some AXIe modules and systems require a different installation
and setup procedure than described in this manual. Refer to the
installation documentation supplied with your AXIe module and
or system for detailed installation information.
For example, installation of the Keysight IO Libraries is not
required for all AXIe systems.
For Best Performance
Operating System Windows 7 (SP1), 32-bit or 64-bit
Windows 8.1, 32-bit or 64-bit
Browser Microsoft Internet Explorer 6 (or later)
Processor 800 MHz or greater
Minimum RAM 4 GB for 32-bit OS
16 GB for 64-bit
Available Hard Disk
Space
1.5 GB
Graphics Support for DirectX 9 graphics with 128MB
graphics memory recommended