Keysight M9521A, Руководство для стартапов

Страница: 11 / 38

Keysight M9521A AXIe System Module Startup Guide 11
Step 1: Unpack and Inspect the Module
Step 1: Unpack and Inspect the Module
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe work station.
The following figure shows an example of a static-safe work station using two
types of ESD protection. Purchase acceptable ESD accessories from your local
supplier.
- Conductive table-mat and wrist-strap
combination.
- Conductive floor-mat and heel-strap
combination.
Both types, when used together, provide a
significant level of ESD protection. Of the
two, only the table-mat and wrist-strap
combination provides adequate ESD
protection when used alone. To ensure
user safety, the static-safe accessories
must provide at least 1 M Ω of isolation
from ground.
Inspect for damage
After unpacking the AXIe System Module, carefully inspect it for any shipping
damage. Report any damage to the shipping agent immediately, as such
damage is not covered by the warranty.
Keysight’s AXIe Modules are shipped in materials that prevent
static electricity damage. The module should only be removed
from the packaging in an anti-static area ensuring that correct
anti-static precautions are taken. Store all modules in anti-static
envelopes when not in use.
To avoid damage when handling a module; do not touch exposed
connector pins.