Keysight Infiniium 9000 Series, Руководство по оценке

Страница: 52 / 72

8
SPI
52 Keysight Infiniium 9000 Series Oscilloscope Evaluation Guide
As you click on rows in the protocol viewer, the blue marker shows the
exact associated time in the waveform menu.
SPI Using Analog Channels
You can also capture SPI signals by connecting the oscilloscope’s analog
channels to the proper signals on the demo board’s 40-pin connector.
Make connections and perform initial setup:
1 To power the demo board, connect a USB cable between it and the
Keysight Infiniium 9000 Series oscilloscope.
2 Connect the scope analog channel probes to pins on the demo board’s
40-pin connector:
3 Turn the SELECT switch to position 6 (SPI).
4 Press [Default Setup] .
5 Press [AutoScale] .